Liquid-applied waterproofing
Bitumen emulsion waterproof coating
A water-based, cold-applied bitumen waterproof emulsion: low cost per square metre, no flame on site, and a natural fit for South Asia and North Africa.
The price fighter for basements and roof base layers
- Family
- Liquid-applied waterproofing
- Common packaging
- 20 kg pail
- Standards
- JC/T 408-2005
Where it is used
- Basement exterior walls
- Roof base layers
- Roads and bridges
Why this line sells
- Lowest cost per square metre in the range
- Water-based and cold applied — no torch
- High elongation for a bitumen product
Typical values
- Solids content
- ≥ 45%
- Elongation at break
- ≥ 600%
- Bond strength
- ≥ 0.30 MPa
- Impermeability
- 0.1 MPa · 30 min
- Heat resistance
- 80–110 °C
- Low-temperature flexibility
- −15 / 0 °C
Standards
- JC/T 408-2005
Typical values against the referenced standards. Actual values are shown on the test report issued for each batch, and specifications can be adjusted to local standards and customer requirements.
Other products
View all- Cementitious waterproofing
K11 polymer cement waterproof slurry
The bathroom and basement workhorse, in general and flexible grades
- Solids content
- ≥ 70%
- Tensile strength
- 1.2–1.8 MPa
- GB/T 23445-2009
- JC/T 2090-2011
- Cementitious waterproofing
JS polymer cement waterproof coating
Flexible, water-based, and happy on damp substrates
- Solids content
- ≥ 70%
- Tensile strength
- 1.2–1.8 MPa
- GB/T 23445-2009
- Liquid-applied waterproofing
Acrylic waterproof roof coating
Coloured, UV-stable, and the white one cools the building
- Solids content
- ≥ 65%
- Tensile strength
- 1.0–1.5 MPa
- JC/T 864-2008